Check out our Roll In Lifting Table!

U-Lift Roll In Palletizing Lift Tables from Presto : The easy way to increase efficiency in manual pallet loading and unloading operations. The U-Lift is a low-profile hydraulic lift table with a lowered height of only 3 1/8". The U-Lifts platform features a unique U-shape void that allows a hand pallet jack to roll in between the platform sides. With the pallet jack fully raised, the worker rolls it into the platform cut out. Notice the pallet blocks right over the platform sides. Once in position, the pallet jack is lowered and wheeled away. Workers use a foot switch control to position the platform at any height up to 31 1/2", to place the load at a comfortable height, allowing access without bending or stretching. In this pallet unloading demonstration, the work begins with the platform raised only a few inches to put the top level of boxes in position. Notice that she moves the boxes easily with a near-effortless sliding motion rather than lifting them. The U-Lift offers unobstructed access to all four sides of the platform and the load so workers can pick boxes from any side. With the top layer removed she raises the platform again to bring the next level into reach. And as each subsequent layer is removed, she raises the platform to access the next layer. A mechanical toe sensor around the entire perimeter of the platform stops downward travel upon contact with any obstruction. Two mechanical safety chocks can be swiveled into position prior to maintenance to prevent lowering of the platform and protect workers. To achieve its 3 1/8" lowered height, an external hydraulic pump and one horsepower motor is used. The U-Lift operates on 115 volt power and comes pre-wired with a cord and plug. So if you are looking for a way to manually load and unload pallets more efficiently, and need hand pallet jack accessibility, consider a U-Lift low profile hydraulic scissor lift from Presto.